See the real chapter for details. A set of pictures allows you to see the spear and shield of the straight 10
As the first-generation armed helicopter of China, Zhi 10 is the most beautiful national machine recognized by military fans in the 21st century. The two planes have been statically displayed in Zhuhai.
Under the beautiful appearance, the 7-ton straight 10 is equipped with cannons, air-to-ground missiles, air-to-air missiles and aerial rockets that can be linked with forward-looking infrared, visible light turrets, helmet-mounted displays, etc. A weapon system with a level of martial arts.
In terms of ground-to-ground weapons, the dark-green two-type air-to-ground missiles are the standard killer weapons against ground targets. Among them, the larger one on the inside is the AKD10A air-to-surface missile, comparable to the latest US laser semi-active guided Haier missile. According to the equivalent export-type blue arrow type 7, the data is 46 kilograms and the range is 8 kilometers. The ability to break the armor is greater than or equal to 1400 mm.
The smaller one is the AKD9 air-to-ground missile. This type of missile is slightly different from the AKD10A in the rear wing. It is similar to the blue arrow 9 missile in the whole. According to the blue arrow type 9 data, the weight is 30 kilograms and the range is 6 kilometers. It is worth mentioning that the AKD9 seems to be more equipped with straight 9WA/WZ and straight 19, in addition, the Mi 171 armed type can also be launched after the rigging.
It is a mystery to be able to carry 16 air-to-ground missiles. However, from the public channels such as news screenshots, there is no direct evidence to carry at the same time. The typical airspace mission of the straight 10 is 4 air-to-ground missiles and 2 7-unit (or 19-unit) 90mm rocket launchers (HF26). type).
In the straight 10 ground attack weapon, there is a newly developed 90mm (in the middle of the picture, 70mm in the early stage) aviation rocket, which is also a low-cost, high-precision air-ground weapon option, similar to the US 70 The millimeter Hydra rocket has a range of about 5 kilometers, and it is easy to change to laser semi-active guidance in the future, similar to the APKWS II guided rocket developed by Hydra.
It is said that the troops are very satisfied with this new type of aeronautical rocket. The Luhang straight 10 usually carries two 7-tube HF26 rocket launchers, but the straight 10 of the Army and the straight 10K of the Air Force have shown the 19-tube type. A kind of rocket launcher has a lot of prestige.
The straight 10 cannons have also been widely debated. The more common term is the 23mm caliber. This cannon is manufactured by AVIC's own 11X plant. Straight 10 is a force that attaches great importance to air combat capability. The enemy helicopters such as Apache that annihilated the other side have always been important design ideas. The 23mm caliber gun is also the main choice of our air force. Strong ability is one of the reasons for choosing this machine gun.
When it comes to air combat, many countries are armed with air-to-air missiles that have been modified by individual air-to-air missiles. They are equipped with air-to-air missiles specially designed for helicopters. 霹雳90 (you are not mistaken, use your own The version is indeed called this, and does not believe that the enlarged serial view of the production serial code on the bomb.), is rare in various countries.
There are spears and shields. Straight 10 also has a perfect radar and photoelectric self-defense countermeasure system. There are 4 teat-type radar warning receiver antennas on the front and rear of the fuselage, and laser warning system antennas on both sides of the short wing. Everyone is familiar with the electronic/optoelectronic countermeasure system, but the square base on the picture has always been used for unknown purposes. Many of the arguments are that the UV missile approaches the mounting base of the alarm, but curiously, it seems that it has never been installed.
Having said that, I know that you have to open the spit mode, and the engine power and armor thickness of the straight 10, then, please start.
If you need a set to offer your fiber optic and its connectors protection, then there may different types of fiber optic terminal boxes burst into your mind. Optical terminal box(OTB) is mounted to in and out side wall of building or pole to distribute and connect optical cable for distribution of subscriber. It is designed with controls that maintain the fiber bending radius throughout the unit on the segregated customer and provider sides.
Our fiber optic terminal box series includes cabinet, fiber splice closure, sliding rack mount fiber patch panel, wall mount Distribution Box and fiber optic surface mount box(86*86mm type). They all offer good protection either mechanical or environment to optical fiber and connectors inside. For convenient cable management, they provide termination, splicing and storage functions for Fiber Optic Cable systems.
The main material for our fiber optic terminal box is cold rolled steel with powder coating finished. If you need plastic material to keep light but solid, we have PC material products for your option. Such as our Fiber Optic Splice Closure and surface mounting box.
For different application, you can find our product accordingly. Either outdoor or indoor, either for small capacity or large capacity, either for hanging in the air or bury under the earth, either install on the wall or on the desk, you can always find there is one type suitable to you.
Fiber Optic Terminal Box,For the protective connection and storage between cables and pigtails. Supply reliable cable fixing, stripping, and grounding device; Small cubage, unique structure, easy installation.
If you need a set to offer your fiber optic and its connectors protection, then there may different types of fiber optic terminal boxes burst into your mind. Optical Terminal Box(OTB) is mounted to in and out side wall of building or pole to distribute and connect optical cable for distribution of subscriber. It is designed with controls that maintain the fiber bending radius throughout the unit on the segregated customer and provider sides.
Our fiber optic terminal box series includes cabinet, FDP, Fiber Terminal Box FTB, Fiber Optic Distribution Point Box, wall mount distribution box and fiber optic surface mount box(86*86mm type). They all offer good protection either mechanical or environment to optical fiber and connectors inside. For convenient cable management, they provide termination, splicing and storage functions for fiber optic cable systems.
Fiber Optic Terminal Boxes, Fiber Optic Distribution Point Box, Fiber Optic Cable FTTH Termination, Fiber Optic Junction Box, Fiber Access Terminal, Fiber Terminal Box FTB
NINGBO YULIANG TELECOM MUNICATIONS EQUIPMENT CO.,LTD. , https://www.yltelecom.com