Led light with controller how to use

AEM-3600RC multi-function LED controller is a general-purpose high-performance overall color-changing power controller with the most advanced PWM (Pulse Width Modulation) control technology; it can control all four-wire three-circuit (common anode) LEDs. Colorful lighting products.

The AEM-3600RC controller is controlled by an RF remote control and is not limited by direction and obstacles. It can send control commands to the controller within the effective distance. For RGB low-power and high-power LED lamps can be controlled, control small-power LED lamps are controlled by power, control high-power LED lamps provide PWM signals, and one controller can control unlimited high-power LED lamps.

Power input: DC12V-DC24V

Speed ​​selection: 8

Output load current: 6A / way & TImes; 3 way

Overall brightness adjustment: 8 levels

Total output power: 1~90W (5V)

Working temperature: -35 ° C -55 ° C

1 to 220W (12V) 1 to 450W (24V)

Dimensions: L211 & TImes; W40 & TImes; H30 (mm)

Change mode selection: 17 kinds

Packing size: L215 & TImes; W43 × H33 (mm)

Gray level: 256 levels of the highest RGB

Gross weight: 210 grams

Remote control distance: 50 meters with obstacles, normal 100 meters

1, button control and RF wireless remote control, reliable remote control distance of 50 meters.

2. Automatically adapt to LED lamps within the working voltage range of DC12-24V.

3. 0N/OFF switch controller function.

4, three-channel RGB full color control, the maximum output of each channel to 6A.

5, 17 kinds of jump, gradient change mode, the gray level is the highest RGB each 256 levels.

6, can independently select the change speed and adjust the brightness of each change mode

7, change pause function, can maintain the current LED lamp gray level and color.

8, function recovery button, in the case of chaos can be restored to factory settings.

9, with 3060 power expander online, unlimited output power

The controller has 7 function setting keys: ON/OFF, PAUSE, MODE+, MODE-, SPEED, BRT, and RESET. The first six buttons correspond to the 1, 2, 3, 4, 5, and 6 buttons of the remote control.

Stand-alone connection diagram

1. The following figure is an example of connecting a full-color low-power LED module.

2. The following figure shows the connection of high-power LED lamps, which can be connected to various high-power lamps. The controller only provides the constant current IC inside the signal-driven lamps. The power supply is additionally provided according to the working voltage and power of the lamps. The single-machine controller can be connected in parallel with an unlimited number. High-power LED lamps.

Fiber Optic Splice Closure

CIXI LANGUANG PHOTOELECTRIC TECHNOLOGY CO..LTD , https://www.cxblueray.com